Step 1: Install the chamber base and ensure it is level
Step 2: Apply lubricant to the inner lip on the chamber base
Step 3: Fit the seal on the bottom of the first riser section
Step 4: Apply lubricant to the seal and bottom of the riser section
Step 5: Place the riser on top of the chamber base and line it up, then rotate 180 degrees in one direction and then back while applying a slight downward pressure
Step 6: Ensuring the riser is centralised, push it down firmly
Step 7: Repeat the process for each riser section
Written by
Mark Chambers
Marketing Manager
As Marketing Manager, Mark plays an active role in running strategic projects to increase our brand profile.
